Firmware Update

This is the firmware for Eddy Bridge. You need to have Eddy Bridge already installed for this firmware to work. You can find instructions to install Eddy Bridge here. Here are the steps to update your firmware: First download the correct firmware from here:

  1. Raspberry Pi 4 – (170 MB)
  2. Raspberry Pi 3  – (170 MB)
  3. Raspberry Pi Zero W – (170 MB)

Next, go to your local website, located at: http://eddy.local and click on Advance -> Firmware.

Eddy Bridge Firmware Update
In this new page, locate your artifact/firmware and click on Upload & Upgrade. 

Eddy Bridge will reboot in 5-10 minutes.

One Reply to “Firmware Update”

Comments are closed.